Product Catalog
Find products by vessel type, material, capacity, closure or application. View each product page for specifications and available options.
White HDPE Graduated Wide-Mouth Bottles
Reagents, powders and laboratory samples can be stored in white HDPE, with capacities from 125 mL to 2 L. The bottles are also described as wide-mouth reagent containers for routine laboratory storage.
PP Graduated Wide-Mouth Bottles
A 100 mL to 2 L capacity range covers reagents, prepared solutions and dry laboratory samples. Made from PP, these bottles are used for laboratory storage and are also known as wide-mouth reagent containers.
Amber HDPE Graduated Wide-Mouth Bottles
Amber HDPE is the body material for these 125 mL to 1 L reagent containers. Used for prepared solutions, powders and samples, they are also known as wide-mouth reagent bottles.
White HDPE Graduated Narrow-Mouth Bottles
Prepared reagents and liquid samples are typical contents for this white HDPE range. Capacities run from 125 mL to 1 L for laboratory storage and pouring, under the common name narrow-mouth reagent containers.
Amber HDPE Graduated Narrow-Mouth Bottles
Four capacities—125 mL, 250 mL, 500 mL and 1 L—are available in amber HDPE for storing laboratory liquids. Also called narrow-mouth reagent containers, the bottles are used for reagents, prepared solutions and liquid samples.
PP Graduated Narrow-Mouth Bottles
For reagents and prepared laboratory solutions, this PP range provides 100 mL, 250 mL, 500 mL and 1 L capacities. The vessels are commonly called narrow-mouth reagent containers and are used for storing and pouring liquids.
Black HDPE Narrow-Mouth Reagent Bottles
Black HDPE bodies hold reagents, solutions and liquid samples in sizes from 125 mL to 1 L. These laboratory storage vessels are also known as narrow-mouth reagent containers and are used for holding and pouring liquids.
Black HDPE Graduated Wide-Mouth Bottles
Powders, prepared reagents and laboratory samples are common contents for these black HDPE bottles. The 125 mL to 1 L range is used for storage and is also described as wide-mouth reagent containers.
Amber HDPE Narrow-Mouth Bottles
Small 4 mL bottles through 5 L containers cover different quantities of laboratory reagents and samples. The bodies are amber HDPE, and the range is used for liquid storage under the common name reagent bottles.
Narrow-Mouth Natural HDPE Bottles
Natural HDPE is used across a 4 mL to 5 L range for storing laboratory liquids. Commonly called reagent storage bottles, these containers hold prepared solutions, reagents and liquid samples for later use.
Narrow-Mouth PP Bottles
Liquid samples and prepared reagents can be stored in PP containers from 4 mL to 5 L. This laboratory range is used for storage and pouring and is also known as narrow-mouth reagent bottles.
Large Narrow-Mouth PP Bottles
At 4 L and 8 L, these PP containers are intended for larger quantities of laboratory liquids. They are used to store and transfer prepared solutions and reagents, and are also called large reagent bottles.
Amber HDPE Wide-Mouth Bottles
Dry laboratory samples, powders and reagents are typical contents for this amber HDPE range. Capacities extend from 30 mL to 5 L for storage, with wide-mouth reagent containers as a common alternative name.
Wide-Mouth Natural HDPE Bottles
A natural HDPE body and capacities from 30 mL to 5 L define this laboratory storage range. The bottles hold powders, reagents and solid samples and are also commonly described as wide-mouth reagent containers.
Wide-Mouth PP Bottles
Laboratory powders and solid samples can be stored in polypropylene containers from 30 mL to 5 L. This PP range is also used for reagents and is commonly listed as wide-mouth reagent storage bottles.
GL45 PP Bottles
Buffers and prepared laboratory solutions are typical contents for these 100 mL to 2 L PP containers. Used for reagent storage, the range is also known as laboratory media bottles or reagent bottles.
White HDPE Boston Round Bottles
Reagent and sample storage are the laboratory uses for these white HDPE containers. The 50 mL, 100 mL and 400 mL bodies are made from high-density polyethylene and are also commonly described as round reagent bottles.
LDPE Dropper Bottles with Tamper-Evident Caps
Dispense reagents and other laboratory liquids drop by drop from LDPE containers in 2 mL to 120 mL sizes. Low-density polyethylene forms the bottle bodies, which are also described as drop-dispensing containers.
LDPE Dropper Bottles with Colored Screw Caps
Small quantities of laboratory liquids can be held and dispensed in drops from this 4 mL to 30 mL LDPE range. The low-density polyethylene bodies are commonly referred to as dropper containers or dispensing bottles.
Square PET Media Bottles
Culture media, buffers and prepared solutions can be stored in PET containers from 25 mL to 1 L. The polyethylene terephthalate vessels are also commonly described as media storage bottles.
Square PETG Media Bottles
For storing prepared media and laboratory buffers, this range uses PETG bodies in 25 mL to 1 L capacities. Made from glycol-modified polyethylene terephthalate, the containers are also known as media storage bottles.
Square Polycarbonate Media Bottles
Prepared laboratory solutions and culture media are typical contents for these 75 mL to 2.5 L polycarbonate containers. The PC bodies are used for storage, under the common name media bottles or media storage containers.
HDPE Dispensing Carboys
Store laboratory water and prepared solutions in HDPE containers ranging from 5 L to 50 L. These dispensing carboys, also known as laboratory jugs, are used for holding and dispensing bulk liquids.
PP Laboratory Carboys
From 250 mL containers to 50 L vessels, this PP range covers the storage and transfer of laboratory liquids. Often called laboratory carboys or reagent containers, they hold water, reagents and prepared solutions.
PP Wide-Mouth Carboys
Store bulk laboratory liquids in polypropylene containers with 10 L, 15 L, 25 L and 50 L capacities. This PP range is used for holding and transferring prepared solutions and is also commonly called laboratory jugs.
LDPE Wash Bottles
Rinse glassware, wash filter papers or dispense small amounts of liquid with a 250 mL or 500 mL LDPE bottle. The low-density polyethylene containers are also commonly called squeeze wash bottles.
Clear PET Spray Bottles
Liquid spraying is the use for these clear PET containers, ranging from 20 mL to 250 mL. Made from polyethylene terephthalate, the bottles hold liquids for laboratory or general handling and are also known as atomizer bottles.
White HDPE Spray Bottles
In white high-density polyethylene, capacities of 60 mL, 100 mL, 120 mL and 250 mL are available for liquid spraying. These HDPE vessels are used for laboratory and general dispensing and are also called atomizer bottles.
HDPE Square Powder Bottles
Powders, granules and solid samples are the intended contents for this 450 mL to 2 L HDPE range. Made from high-density polyethylene, the vessels are used for laboratory storage and are also called square powder containers.
PP Low-Speed Centrifuge Bottles
Separation of laboratory liquid samples is the intended use for this PP range. Capacities run from 250 mL to 1 L, with centrifuge vessels serving as another common description for these sample containers.
Rectangular Low-Speed Centrifuge Bottles
For liquid-sample centrifugation, capacities are 1 L, 1.8 L and 2.4 L. HDPE is the specified material for the 1 L model numbered 82413. These large-volume sample vessels are also described as rectangular centrifuge containers.
PP High-Speed Sealing-Cap Centrifuge Bottles
With capacities from 150 mL to 1 L, this polypropylene range is used for centrifuging laboratory liquids. The PP bodies hold samples during separation and are also described as centrifuge vessels.
PP High-Speed Centrifuge Bottles
Larger liquid-sample volumes are covered by PP containers ranging from 250 mL to 2 L. Used for centrifugation and sample separation, the bottles are also known in laboratories as centrifuge vessels.
PC High-Speed Centrifuge Bottles
Polycarbonate is the body material for this 200 mL to 1 L range used in laboratory sample separation. The PC containers hold liquids for centrifugation and are also referred to as centrifuge vessels.
PPCO High-Speed Centrifuge Bottles
Two sizes, 250 mL and 500 mL, are made from polypropylene copolymer for laboratory liquid-sample separation. These PPCO containers are used for centrifugation and may also be described as laboratory centrifuge vessels.
HDPE Flat-Bottom High-Speed Centrifuge Bottles
Three capacities—200 mL, 600 mL and 900 mL—are listed for this HDPE liquid-sample separation range. The bodies are high-density polyethylene and are used for laboratory centrifugation, under the common description flat-bottom centrifuge containers.
PPCO Four-Port High-Speed Centrifuge Bottles
At a 1 L capacity, this polypropylene copolymer vessel is used for centrifuging laboratory liquid samples. The PPCO body holds samples during separation and is also described as a four-port centrifuge container.
PP Conical-Bottom Centrifuge Tubes
Collect sediment from laboratory samples using PP tubes in 150 mL to 500 mL capacities. These vessels are used for centrifugation and sample separation, and are commonly referred to as conical centrifuge tubes.
PP Screw-Cap Round-Bottom Centrifuge Tubes
Polypropylene bodies in 10 mL to 120 mL capacities are used for separating laboratory liquid samples by centrifugation. These PP sample vessels are also commonly described as round-bottom centrifuge tubes for laboratory separation work.
PPCO High-Speed Round-Bottom Centrifuge Tubes
A 4 mL to 500 mL range accommodates different laboratory sample volumes in polypropylene copolymer. These PPCO vessels, commonly called round-bottom centrifuge tubes, are used to hold liquid samples during centrifugation and separation.
PP Hinged-Cap Round-Bottom Centrifuge Tubes
In 30 mL, 60 mL, 125 mL and 150 mL sizes, polypropylene provides the tube material for liquid-sample centrifugation. The PP vessels are used in laboratory separation work and are also described as round-bottom centrifuge tubes.
PC High-Speed Round-Bottom Centrifuge Tubes
Liquid samples from 5 mL to 120 mL can be handled in polycarbonate tubes for laboratory centrifugation. This PC range is used for sample separation and is also described as round-bottom centrifuge tubes.
PP Removable-Cap Round-Bottom Centrifuge Tubes
For centrifugation of laboratory liquids, this polypropylene range covers 5 mL to 60 mL sample volumes. The PP vessels are used for separation work and are also commonly referred to as round-bottom centrifuge tubes.
PP Removable-Cap Conical Centrifuge Tubes
Choose 20 mL or 75 mL volumes for centrifuging laboratory samples and collecting sediment. Made from polypropylene, these PP vessels are used in sample separation and are also commonly known as conical centrifuge tubes.
Empty PP Fecal Collection Tubes
For stool-collection kit assembly, these polypropylene tube bodies provide 3 mL, 5 mL and 10 mL capacities. The PP components are used for sample collection and are also known as stool sample tubes or fecal specimen containers.
Empty PP Specimen Transport Tubes
Collect and transport laboratory specimens in PP tube bodies of 5 mL, 10 mL or 30 mL. Made from polypropylene, these collection components are also described as sample transport tubes or laboratory specimen containers.
Empty PET Diagnostic Reagent Bottles
Package diagnostic reagents in PET bodies with capacities of 7 mL, 10 mL, 50 mL and 150 mL. These polyethylene terephthalate containers are used in reagent-kit assembly and are also described as diagnostic reagent packaging bottles.
Controlled-Rate Cell Freezing Container
Hold 1 mL and 2 mL cryogenic vials during laboratory freezing procedures in an ABS container. Made from acrylonitrile butadiene styrene, this type of vessel is also called a cryovial freezing container.
Empty PC Blood Culture Bottles
A 70 mL polycarbonate body is used for assembling blood-culture bottles in diagnostic laboratory production. These PC components are also called blood-culture bottle bodies, with their application centered on diagnostic bottle assembly.
Empty Blood Grouping Gel-Card Components
Assemble laboratory blood-grouping assays using polypropylene card components. These PP items are used in gel-card test assembly and are also commonly called blood-typing gel cards or gel-card bodies for diagnostic production.
Empty Lateral Flow Test Cassette Housings
Build lateral-flow diagnostic tests around these cassette bodies, used as housings during test-kit assembly. Rapid-test cassettes and lateral-flow cassette housings are common alternative names for this type of diagnostic component.
GL45 PP Erlenmeyer Flasks
Mix laboratory reagents and prepare solutions in polypropylene vessels from 75 mL to 1 L. These PP flasks are also used for media preparation and are commonly called conical flasks in laboratory work.
PP Narrow-Neck Erlenmeyer Flasks
From 25 mL preparations to 2 L batches, these PP vessels are used for mixing solutions, reagents and media. The polypropylene vessels are also commonly known as conical flasks for solution preparation.
PC Erlenmeyer Culture Flasks
Prepare media, mix solutions and carry out shaking cultures in PC vessels from 125 mL to 1 L. Polycarbonate is the body material for these laboratory containers, also commonly known as conical culture flasks.
PP Volumetric Flasks
Solution preparation and laboratory dilution are the uses for this 10 mL to 1 L polypropylene range. The PP vessels are also called measuring flasks, with capacities chosen according to the volume of solution being prepared.
PP Graduated Cylinders
Measure and dispense laboratory liquids in polypropylene vessels from 10 mL to 2 L. Commonly called measuring cylinders, this PP range covers liquid-volume work in solution preparation and other routine laboratory tasks.
PP Griffin Low-Form Beakers
Holding, mixing and transferring liquids are the everyday uses for these 30 mL to 2 L PP vessels. Made from polypropylene, they are commonly described as low-form beakers or Griffin beakers in laboratory work.
PP Analytical and Powder Funnels
Transfer liquids or dry powders into laboratory vessels using polypropylene funnels. This PP range includes analytical and powder-transfer uses and is also described as laboratory transfer funnels for filling bottles and other containers.
PP Long-Stem Funnels
Pour laboratory liquids into bottles and flasks through a polypropylene funnel. Used for liquid transfer into narrow vessel openings, this PP item is commonly called a long-stem funnel or laboratory filling funnel.
PP Vacuum Flasks and Two-Piece Buchner Funnels
Vacuum filtration and solid-liquid separation use PP flasks from 250 mL to 2 L, also called filter flasks. The polypropylene Buchner funnels in this range have capacities from 80 mL to 2900 mL for laboratory filtration work.
Graduated LDPE Transfer Pipettes
Transfer small liquid volumes with low-density polyethylene pipettes in capacities from 0.2 mL to 10 mL. This LDPE range is used for laboratory dispensing and sample transfer and is also commonly called plastic Pasteur pipettes.
PP Laboratory Sampling Scoops
Collect, weigh and transfer powders or granules with polypropylene scoops from 10 mL to 3 L. This PP range is used for laboratory dry-material handling and is also commonly called sampling spoons or powder scoops.